{"product_id":"mbcoriginal-functionaltrainer-addon","title":"MBC Original Rack Functional Trainer (add-on)","description":"\u003ch5\u003e Product Description\u003c\/h5\u003e\n\n\u003cp\u003e \u003cspan\u003eThis functional trainer can be installed on MBC's original rack, and is an add-on part for adding to an existing rack.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eThis product is equipped with two pulleys, a lat pulldown pulley that reduces the load by 1\/1 and an adjustable pulley that reduces the load by 2\/2, making it highly versatile and allowing for a wide range of training.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eConventional adjustable pulleys have problems such as the pulley not being able to be set to a sufficient height, making it difficult to use for lat pulldowns, and the load is halved, making it difficult to set a sufficient weight for some exercises. However, this product solves these problems by adding a pulley for lat pulldowns.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eThe adjustable pulley has a 1\/2 resistance, allowing for a wide range of motion required for functional training, while the lat pulldown pulley has a 1\/1 resistance, making it suitable for heavy weight workouts.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eWhen the left and right lat pulldowns are connected with a connector bar, you can perform lat pulldowns with a maximum load of 250 kg or workout using the adjustable pulley with a load of 125 kg.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003ch5\u003e specification\u003c\/h5\u003e\n\n \u003cp\u003e*Detailed specifications may be changed without notice.\u003c\/p\u003e\n\n\u003cul\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eProduct weight\u003c\/strong\u003e : Approx. 181kg\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eSize\u003c\/strong\u003e : Height 225cm\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eWeight stack\u003c\/strong\u003e : 1 \u003cspan\u003e25kg (5kg increments)\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003ePulley ratio\u003c\/strong\u003e : \u003cspan\u003eLat pulldown pulley: 1\/1\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eAdjustable pulley: 1\/2\u003c\/span\u003e\n\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cspan\u003e\u003cstrong\u003eAdjustable pulley height\u003c\/strong\u003e : 39cm-184cm (in 5cm increments)\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e \u003cspan\u003e\u003cstrong\u003eFrame color\u003c\/strong\u003e : Black (powder coated)\u003c\/span\u003e\n\u003c\/li\u003e\n\n\u003cli\u003e\n\n \u003cstrong\u003eCountry of Origin\u003c\/strong\u003e : China\u003cbr\u003e\n\n\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\n\u003ch5\u003e Shipping\u003c\/h5\u003e\n\n\u003cp\u003e Free shipping: **Hokkaido and Okinawa; 9,900 yen\u003c\/p\u003e\n\n\u003cp\u003e \u003cspan\u003eThis product will be delivered by Seino Transportation.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eDelivery will be to your doorstep. Seino Transportation delivery staff cannot carry or set up the product inside the building.\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003eDeliveries to condominiums, buildings, and apartment buildings will generally be made at the first floor entrance.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eIn addition, if the delivery address is in an area where Seino Transportation cannot deliver, or is located at the back of an alley where a 4-ton truck cannot enter, the item will be handed over at the nearest Seino Transportation office.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eIf you purchase other products at the same time, they may be delivered separately from this product by Yamato Transport, Japan Post, Sagawa Express, etc.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cb\u003e[Shipping size and packaging weight]\u003c\/b\u003e\u003cbr\u003e \u003cspan\u003eMBC's original racks divide boxes into as small pieces as possible for transportation into condominiums and apartments.\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003eFor a 210cm rack, the largest box with the support poles stored is 205cm x 30cm x 9cm, and for a 180cm rack, the largest box with the support poles stored is 175cm x 30cm x 9cm. It is not normal for a product to not fit into an elevator or pass through a door when delivered.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eThe heaviest box weighs approximately 30kg.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cb\u003e[About specifying delivery date and time]\u003c\/b\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003e*For private homes\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eFor deliveries of large free weight equipment to private residences, it is not possible to specify a delivery date and time as the delivery company, Seino Transportation (Kangaroo Delivery), is currently not accepting date and time requests for deliveries to private residences.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eTherefore, the item will be shipped without a specified date and time, but the delivery date and time can be adjusted to some extent by contacting the nearest Seino Transportation office after the item has been shipped and making arrangements.\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003eWhen delivering free weights to private homes, if the recipient is not at home and a second delivery is required, this places a heavy burden on the delivery staff. Therefore, if you are often not at home, we ask that you make arrangements to receive the item beforehand if possible.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e・Meeting method\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eAfter the product has been shipped, please contact the nearest Seino Transportation office by phone and provide the inquiry number and the date and time that you can receive the product.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eThe delivery store can be confirmed using the confirmation URL that will be sent to you via email when the product is shipped.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003eWe have also asked Seino Transportation to contact the recipient by phone before delivery, but the sooner the recipient contacts us the easier it will be to arrange the desired date and time.\u003c\/span\u003e\u003cbr\u003e \u003cbr\u003e\u003cspan\u003eAfter placing your order, if you specify a convenient delivery date, we will ship the product a few days before that date so that it can be delivered at the specified date and time.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003e*For stores and corporations\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eYou can only specify the date of delivery; you cannot specify the desired delivery time.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e \u003cspan\u003e*Seino Transportation Office stop\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eWhen placing an order, please enter the address and name of your nearest Seino Transportation office in the designated field on the delivery address input page.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eThe storage period at the branch office is 10 days from the date of arrival.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cbr\u003e \u003cb\u003e[About warranty]\u003c\/b\u003e\u003cbr\u003e \u003cspan\u003eMBC original rack equipment is sold with a 5-year warranty against manufacturing defects and a 30-day money back guarantee.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003eYou may return the product for any reason within 30 days of delivery, even if it has been opened or used.\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003eWe also stock spare parts so that if any defective products are found, we can quickly replace them on a part-by-part basis.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e*Please contact us in advance by email or phone when returning an item.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e*When returning a product, please be sure to repackage it in the original packaging it was delivered in.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e*The outer packaging will be required for returns or exchanges, so please keep it for 30 days after the product arrives. If the outer packaging has been discarded, returns will not be accepted. In addition, when returning a defective product for exchange, you will need to pack it yourself. Under no circumstances will we be able to send you repackaging outer packaging or packaging materials.\u003c\/span\u003e\u003cbr\u003e \u003cspan\u003e*If you return the product for your own reasons, you will be responsible for the original shipping fee, return shipping fee, refund fee, and payment fee.\u003c\/span\u003e \u003cbr\u003e\u003cspan\u003e*For products other than MBC original racks (even if purchased together with MBC original racks), we cannot accept returns or exchanges after opening unless there is an unavoidable reason such as a defective product.\u003c\/span\u003e\u003c\/p\u003e\n\n\u003ch5\u003e Assembly Method\u003c\/h5\u003e\n\n\u003cp\u003e\u003cbr\u003e \u003cspan\u003eTools required for assembly\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\n\u003cdiv\u003e - 1 pair of 30mm wrenches or spanners\u003c\/div\u003e\n\n\u003cdiv\u003e・19mm wrench\u003c\/div\u003e\n\n\u003cdiv\u003e - 1 x 5mm hex wrench\u003c\/div\u003e\n\n\u003cdiv\u003e - 1 x 3mm hex wrench\u003c\/div\u003e\n\n\u003cdiv\u003e・Stepladder (or large footstool) 1 unit\u003c\/div\u003e\n\n\u003cp\u003e\u003c\/p\u003e\n\n\u003cp\u003e The product comes with an assembly manual, but please be sure to check the assembly instructions page at the link below before assembling the product.\u003cbr\u003e\u003c\/p\u003e\n\n \u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003ca rel=\"noopener\" title=\"MBC Original Rack Functional Trainer Assembly Instructions Page\" href=\"https:\/\/945e14-3.myshopify.com\/pages\/mbc%E3%82%AA%E3%83%AA%E3%82%B8%E3%83%8A%E3%83%AB%E3%83%A9%E3%83%83%E3%82%AF-%E3%83%95%E3%82%A1%E3%83%B3%E3%82%AF%E3%82%B7%E3%83%A7%E3%83%8A%E3%83%AB%E3%83%88%E3%83%AC%E3%83%BC%E3%83%8A%E3%83%BC%E7%B5%84%E7%AB%8B%E6%96%B9%E6%B3%95\" target=\"_blank\"\u003eMBC Original Rack Functional Trainer Assembly Instructions Page\u003c\/a\u003e\u003c\/span\u003e\u003c\/p\u003e\n\n\u003ch5\u003e Suitable rack\u003c\/h5\u003e\n\n\u003cp\u003e *This product can be installed on a rack with the following dimensions: total height 210 cm, distance between posts 62.5 cm.\u003cbr\u003e・MBC Half Rack Standard 210cm Type 2\u003cbr\u003e・MBC Power Rack Standard 210cm Type 1 (Post spacing 62.5cm Depth 135cm)\u003cbr\u003e・MBC Power Rack Standard 210cm Type 4 (Post spacing 62.5cm Depth 178cm) \u003cbr\u003e-MBC Half Rack Smith Integrated 210cm *Can only be installed without Smith attachment *After installation, the upper 62.5cm top cross member will be an extra part.\u003cbr\u003e *When installing, all accessory holes at the bottom must be open.\u003cbr\u003e *If you have any questions or concerns about installation, please feel free to contact us using the inquiry form. \u003c\/p\u003e\n\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0673\/5537\/7892\/files\/MRFT_04.jpg?v=1736212319\" alt=\"\"\u003e\u003c\/p\u003e\n\n\u003cp\u003e *This product is sold individually. If you want to install it on both sides of the rack, please purchase two units.\u003c\/p\u003e\n\n\u003ch5\u003e FAQ\u003c\/h5\u003e\n\n\u003cdiv class=\"accordion-container\"\u003e\n\n\u003cdiv class=\"accordion-item\"\u003e\n\n \u003cbutton class=\"accordion-button\"\u003eDoes \u003cspan class=\"accordion-icon\"\u003eit\u003c\/span\u003e come with handles for cable training?\u003c\/button\u003e\n\u003cdiv class=\"accordion-content\"\u003e\n\n\u003cp\u003e Handles are not included, please purchase a suitable handle separately.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"accordion-item\"\u003e\n\n \u003cbutton class=\"accordion-button\"\u003eHow many centimeters does the ceiling need to be to be able to install it \u003cspan class=\"accordion-icon\"\u003e?\u003c\/span\u003e\u003c\/button\u003e\n\u003cdiv class=\"accordion-content\"\u003e\n\n \u003cp\u003eThe total height of the rack on which the functional trainer is mounted is 225cm, but since assembly will be difficult if there is not a gap of about 5cm between the rack and the ceiling, the ceiling in the installation location must be at least 230cm high.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"accordion-item\"\u003e\n\n \u003cbutton class=\"accordion-button\"\u003e\u003cspan class=\"accordion-icon\"\u003eHow\u003c\/span\u003e is the Functional Trainer (add-on) delivered?\u003c\/button\u003e\n\u003cdiv class=\"accordion-content\"\u003e\n\n\u003cp\u003e The Functional Trainer (add-on) will be packed separately into 8 boxes and delivered by Seino Transportation.\u003cbr\u003e Please refer to the table below for box size and weight. (The number, size and weight of packages may change without notice.)\u003cbr\u003e Delivery will be to your doorstep. Seino Transportation delivery staff cannot carry or set up the product inside the building.\u003cbr\u003e For condominiums and apartment buildings, delivery will generally be made at the first floor entrance. \u003cbr\u003eIn addition, if the delivery address is in an area where Seino Transportation cannot deliver, or is located at the back of an alley where a 4-ton truck cannot enter, the item will be handed over at the nearest Seino Transportation office.\u003cbr\u003e *Depending on the delivery destination and order contents, delivery may be made by a carrier other than Seino Transportation.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"accordion-item\"\u003e\n\n \u003cbutton class=\"accordion-button\"\u003eAs the weight stack moves up it stops moving smoothly and becomes jammed \u003cspan class=\"accordion-icon\"\u003e.\u003c\/span\u003e\u003c\/button\u003e\n\u003cdiv class=\"accordion-content\"\u003e\n\n\u003cp\u003e Try loosening both of the small bolts on the top of the guide rod, as over tightening these bolts can cause binding at the top.\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"accordion-item\"\u003e\n\n \u003cbutton class=\"accordion-button\"\u003eWhen using light weights, the shaft of the weight stack may come into contact with the weight. Is there a solution \u003cspan class=\"accordion-icon\"\u003e?\u003c\/span\u003e\u003c\/button\u003e\n\u003cdiv class=\"accordion-content\"\u003e\n\n \u003cp\u003ePlease try the following methods.\u003cbr\u003e 1) Please make sure the floor is completely flat. If the floor is inclined, move it to a flat surface or adjust the flooring to make the floor flat.\u003cbr\u003e 2) Try loosening both small bolts on the guide rod top nuts. Overtightening these bolts can cause the shaft to contact the weight.\u003cbr\u003e 3) Check if the shaft is properly assembled to the top weight stack. There is a locking pin inside the hole of the top weight stack. Normally, the shaft is firmly assembled and fixed in the top weight stack.\u003cbr\u003e If the above does not resolve your issue, please contact us by email.\u003cbr\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"accordion-item\"\u003e \n\u003cbutton class=\"accordion-button\"\u003eThe pins go in easily at the top of the weight stack \u003cspan class=\"accordion-icon\"\u003e,\u003c\/span\u003e but become harder to insert as you go down.\u003c\/button\u003e\n\u003cdiv class=\"accordion-content\"\u003e\n\n\u003cp\u003e If the pin at the bottom of the weight stack gets caught, the floor where you are installing it may be slightly tilted.\u003cbr\u003e Even a slight tilt of the floor can cause the bottom of the rod to shift by several millimeters from side to side, which can cause the pin to get caught.\u003cbr\u003e (Look at the bottom of the weight stack. If the tip of the rod is not in the center of the hole but is far to the right or left, it is likely that the inclination of the floor is the cause.)\u003cbr\u003e As a solution to this problem, we recommend inserting something like a thin rubber washer into the rubber ring at the bottom of the guide rod to correct the slight tilt.\u003cbr\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003cdiv class=\"accordion-item\"\u003e \n\u003cbutton class=\"accordion-button\"\u003eI can't get the pin to go in at the 5kg weight stack. Is this how it's supposed to be \u003cspan class=\"accordion-icon\"\u003e?\u003c\/span\u003e\u003c\/button\u003e\n\u003cdiv class=\"accordion-content\"\u003e\n\n\u003cp\u003e The top weight stack is secured to the shaft by a locking pin, so please rest assured that this is not an issue.\u003cbr\u003e\u003c\/p\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\n\u003c\/div\u003e\n\n\u003ch6\u003e Tab End\u003c\/h6\u003e","brand":"MBC POWER","offers":[{"title":"Default Title","offer_id":45880819679460,"sku":"MRFT","price":167220.0,"currency_code":"JPY","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0673\/5537\/7892\/files\/mbcoriginal-functionaltrainer-addon-01-2048x2048.jpg?v=1775291198","url":"https:\/\/www.mbcpower.live\/en\/products\/mbcoriginal-functionaltrainer-addon","provider":"MBC POWER SHOP","version":"1.0","type":"link"}